farbbalken
Japan
ESS JPN Electrical Safety Consumer
Electrical safety of devices; Electrical safety of equipment; Safety requirements; Electrical shock; Burning behaviour; IP-class; Electrically caused burn; Thermal burn; Sharp edges; Risk of tipping

89.00 € NET

30-Tages-Lizenz

Anwendungsbereich des Regulatory Essentials

This ESSENTIAL describes the legal obligations for manufacturers and importers and the regulatory requirements for electrical equipment as specified in the technical regulation of Japan, esp. the Electrical Appliances and Materials Safety Act No. 234 of 1961 (also called: DEN-AN Law). Definitions (Article 2) (1) The term "Electrical Appliances and Materials" as used in this Act shall mean the following: (i) Parts of electrical facilities for general use (meaning electrical facilities for general use as prescribed in Article 38, paragraph (1) of the Electricity Business Act (Act No. 170 of 1960) and machines, appliances, and materials used in connection therewith, as specified by Cabinet Order; (ii) Portable power generators as specified by Cabinet Order; and (iii) Secondary batteries as stipulated by Cabinet Order. (2) The term "Specified Electrical Appliances and Materials" as used in this Act refers to Electrical Appliances and Materials that are particularly likely to cause danger or damage due to their structure, method of use, or other usage conditions, and are specified by Cabinet Order.

Stakeholder:

Manufacturer, B2C products

Geltende Rechtsvorschriften:

"The Act" Electrical Appliances and Materials Safety Act No. 234 of 1961, latest revision 2011 (also called: DEN-AN Law), Table of Contents: Chapter I General Provisions (Articles 1 and 2) Chapter II Notification of Business, etc. (Articles 3 to 7) Chapter III Conformity Assessment of Electrical Appliances and Materials, etc. (Articles 8 to 26) Chapter IV Restrictions on Sale, etc. (Articles 27 and 28) Chapter V Registration of Conformity Assessment Bodies, etc. - Section 1 Registration of Conformity Assessment Bodies (Articles 29 to 32) - Section 2 Domestic Registered Conformity Assessment Bodies (Articles 33 to 42-2) - Section 3 Foreign Registered Conformity Assessment Bodies (Articles 42-3 and 42-4) Chapter V-2 Order for Hazard Prevention, etc. (Article 42-5) Chapter VI Miscellaneous Provisions (Articles 43 to 56) Chapter VII Penal Provisions (Articles 57 to 61) Supplementary Provisions Ministerial Order to Provide Technical Standards for Electrical Appliances and Materials (lists the essential requirements for electrical appliances and materials) Table of contents: Chapter I General Provisions (Article 1) Chapter II General Requirements (Articles 2 to 6) Chapter III Protection against Hazards (Articles 7 to 17) Chapter IV Noise Level (Article 18) Chapter V Labels (Articles 19 and 20) Supplementary Provisions The Order for Enforcement of the Electrical Appliances and Materials Safety Act regulates (inter alia): - the Specified Electrical Appliances and Materials and - the validity periods of Certificates of Conformity for certain product types Content: Art.1 - Electrical Appliances and Materials Art.1.2 - Specified electrical appliances and materials Art.2 - Transitional Period for Preservation of Certificates Art.2.2 - Effective Period for Registration of Conformity Assessment Bodies Art.2.3 - Burden of Expenses for Conformity Assessment at Offices of Foreign Registered Conformity Assessment Bodies Art.3 - Collection of Reports Art.4 - Special Provisions on Electrical Appliances and Materials Intended for Export Art.5 - Affairs Administered by Prefectural or City Governments Art.6 - Delegation of Authority Art.7 - Classification of Affairs Supplementary Provisions - Transitional Measures Concerning Penal Provisions - Transitional Measures in accordance with Partial Revision of the Order for Enforcement of the Electrical Appliance and Material Control Act - Electrical Appliances and Materials under Transition and Periods Prescribed by Cabinet Order under Article 49 of the Supplementary Provisions of the Consolidation and Streamlining Act - Periods Prescribed by Cabinet Order under Article 50 of the Supplementary Provisions of the Consolidation and Streamlining Act - Transitional Measures in accordance with Enforcement of the Consolidation and Streamlining Act - Transitional Measures Concerning Penal Provisions

Nationale Anwendungsebene:

Manufacturer, DEN-AN law, Specified Electrical Appliances, Non-Specified Electrical Appliances, PSE mark

Länder:

 

Japan

Kommentar bezüglich der Vergleichbarkeit mit der EU-Gesetzgebung:

The Japanese Electrical Appliances and Materials Safety Act is not comparable to the EU LVD legislation....

Status:

Published 2020-06-17 by Anette Dunkel-Reinboth and Benjamin Kerger
Last change 2025-10-30 by Torsten Sahm: Hints, Electrical safety

ID:

#j96d


Inhalt des Regulatory Essentials

Responsible actors
Hier erhalten Sie textbasierte Informationen

Which actor(s) are responsible for compliance with the legal provisions: e. g. - economic operators (manufacturer, importer, distributor, fulfilment service provider), - user (commercial/industrial/professional), - user (private, consumer)?

Regulatory market access conditions for the actor(s)
Hier erhalten Sie textbasierte Informationen

What are the main regulatory requirements (e. g. conformity assessment fulfilment of essential requirements of Annex I 2006/42/EC) prior placing on the market, importation and putting into service (brief description)

Penalty by this legislation
Hier erhalten Sie textbasierte Informationen

What are the possible penalties (e. g. sales ban, fines) in the case of non-compliance?

Exemption clauses
Hier erhalten Sie textbasierte Informationen

Exempted devices/products or industry sectors.

Sub-federal legislation of states/counties
Hier erhalten Sie textbasierte Informationen

E. g. by 2019 an Inter-Governmental Agreement (IGA) on governance of the Electrical Equipment Safety System (EESS) has been signed by Queensland, Victoria, Western Australia and Tasmania.

FTA/MRA status with EU
Hier finden Sie ein thematisch passendes Dokument in ATERIOS
(Zugang nur mit erweiterter ATERIOS Lizenz)

Has the country signed a Free Trade Agreement (FTA) or a Mutual recognition agreement (MRA) with EU?

Authority
Hier erhalten Sie zugehörige weiterführende Links

Name of the authority for approval, registration, market surveillance and/or enforcement

Market surveillance authority
Hier erhalten Sie zugehörige weiterführende Links

Name of the authority for market surveillance and/or enforcement

Link/Reference to other reference document(s)
Hier finden Sie ein thematisch passendes Dokument in ATERIOS
(Zugang nur mit erweiterter ATERIOS Lizenz)

Link/Reference to other reference document(s)
Hier erhalten Sie verlinkte Dokumente zu dieser Thematik

Comment on the comparability to EU legislation
Hier erhalten Sie textbasierte Informationen

Hints
Hier erhalten Sie textbasierte Informationen

Specific recommendations, information or most common mistakes

Hints
Hier erhalten Sie zugehörige weiterführende Links

Specific recommendations, information or most common mistakes

Route to compliance

Formal and administrative requirements

Registration at related authority required?
Hier erhalten Sie textbasierte Informationen

Product registration? Manufacturer registration? Importer / Representative registration? if required.

Local representative legally required?
Hier erhalten Sie textbasierte Informationen

[Yes/No]

Hints
Hier erhalten Sie textbasierte Informationen

Specific recommendations, information or most common mistakes

Equipment authorization (approval process)

Approval process (conformity assessment procedure)
Hier erhalten Sie ein Foto oder Diagram

Means each legally required approval process prior placing on the market, importation or putting into service

Is the IECEE CB Scheme accepted by the authority/approval body?
Hier erhalten Sie zugehörige weiterführende Links

"[Yes/ No / no information available] [Text] Information (website)"

Conformance document(s) to show compliance to the authority
Hier erhalten Sie textbasierte Informationen

e. g. SDoC, technical documentation (for 10 years), filled-in approval forms (e. g. ACMA in AUT)

Conformance document validity and renewal
Hier erhalten Sie textbasierte Informationen

Validity for Conformance document name mentioned. For mandatory certification validity is important.

Which documents are required by an approval body?
Hier erhalten Sie textbasierte Informationen

e .g. formal application

Is a factory inspection legally required
Hier erhalten Sie textbasierte Informationen

Hint to voluntary certification scheme
Hier erhalten Sie textbasierte Informationen

If a important voluntary certification schemes exists, one link will be given. Important voluntary schemes are for example: UL, CSA, VCCI (Japan)

Hints
Hier erhalten Sie textbasierte Informationen

Specific recommendations, information or most common mistakes

Testing & Standards

Specific requirements for testing
Hier erhalten Sie textbasierte Informationen

e. g. is an accredited test lab. mandatory, limits, test samples, product description

General information to the application of standards
Hier erhalten Sie zugehörige weiterführende Links

e. g. China: GB standards are mandatory, EU: harmonized standards shall be published in the OJEU with respect to "presumption of conformity"

Source for standards for conformity assessment
Hier erhalten sie eine Tabelle

National Standardisation Organisation
Hier erhalten Sie zugehörige weiterführende Links

Link to organisation

Are national standards based on IEC/ISO standards?
Hier erhalten Sie zugehörige weiterführende Links

Undetailed information

Is in-country testing legally required?
Hier erhalten Sie textbasierte Informationen

Acceptance of foreign test reports
Hier erhalten Sie textbasierte Informationen

Hints
Hier erhalten Sie textbasierte Informationen

Specific recommendations, information or most common mistakes

Regulatory labelling, markings and user information

Regulatory label (mandatory)
Hier erhalten Sie ein Foto oder Diagram

e. g. product label

Regulatory e-labelling allowed?
Hier erhalten Sie textbasierte Informationen

e. g. put the regulatory information and labels in a software menu

Required information on the product and/or packaging
Hier erhalten Sie textbasierte Informationen

e. g. address of the manufacturer/importer, serial number

User instructions language(s)
Hier erhalten Sie textbasierte Informationen

Regulated by the legal provisions

User instruction requirements and specific compliance notes
Hier erhalten Sie textbasierte Informationen

Form, sentence inside, simple text. E. g. FCC/ISED compliance information, SAR information, battery, environmental information like waste

Digital user documentation allowed?
Hier erhalten Sie zugehörige weiterführende Links

User instructions allowed by QR-Code/internet or digital medium or integrated in device with display? Safety instruction allowed by QR-Code or digital medium?

Warnings, symbols
Hier erhalten Sie textbasierte Informationen

e. g. ANSI Z 535.4

Hints
Hier erhalten Sie textbasierte Informationen

Specific recommendations, information or most common mistakes


Allgemeine Informationen

   
Japan

Code, Kontinent, Wirtschaftsraum

JPN, Asia

Wirtschaftsraum

APEC

Offizielle Amtssprache

The official language is Japanese.

Normen Institut

JSA - Japanese Standards Association | https://www.jsa.or.jp/en/

HS Codemitglied

Yes - since 1964

Full width

Sind noch fragen offen?

Wir freuen uns zu helfen:
essentials@globalnorm.de +49 30 3229027-50

LIZENZIEREN SIE DIESES REGULATORY ESSENTIAL
für 89.00 € NET

Oder kaufen über Buy a 30 day license for 89.00 € net now ....

Ihre persönlichen Daten werden von GLOBALNORM verarbeitet.

Weiter Informationen können in unsere Datenschutzerklärung.